Wired Help:
Wireless Push Button Syncing:
- Chime has 1 button / Push button has 1 pin and jumper
- Chime has 1 button / Push button has 2 switches
- Chime has 1 button / Push button has 8 switches or pins and jumpers
- Chime has 2 buttons / Push button has 8 switches or 8 pins and jumpers
- Chime has 2 switches / Push button has 1 pin and jumper
- Chime has 7 or 8 switches or 7 or 8 pins / Push button has 1 jumper
- Chime has 7 or 8 switches or pins / Push button has 8 switches or pins
Wireless Help:
How to Install a Diode in a Wired Door Chime
Note: Front Door Use Only. Electronic Chime Use Only. For use with any style push button (with or without lighted push button)
-
Diode must be installed on the terminal screws of the Front door push button.
-
Attach one end of the diode to one terminal screw by wrapping the diode 1 turn around screw
-
Attach the opposite end of the diode to the second screw by wrapping the diode 1 turn around screw.
-
Attach the wires from home to the screw terminals on the back of the push button